SV 271 LITE User Manual
3
IMPORTANT NOTES BEFORE USE
✓
Only SVAN 971 and the controller can be disconnected and removed from the station
case by the user. All other disassembling work should be performed strictly by an
authorized service team.
✓
The producer does not recommend removing the controller without a sound reason.
Double check that the controller has a good fixation in the connector after reconnecting.
✓
Do not remove the battery from the case! This operation must be done only by the
authorised service.
✓
SVAN 971 is powered from the e
xternal source and doesn’t use its internal batteries.
Internal instrument’s batteries must be removed for correct system operation and safety
reasons.
✓
The correct connection of the microphone is not signalled by the controller therefore it is
recommended to perform a test measurement each time the station is turned on.
✓
During station operation it is recommended to charge the internal and external batteries
as often as possible; this will extend battery life. It is necessary to charge the battery
after any total discharge.
✓
Monitoring station and/or SB 272 should not be stored for a long time with discharged
batteries. Storing with discharged batteries can damage their batteries. Storing with
discharged batteries for more than one month may result in impossibility to recharge
them.
✓
If Monitoring station and/or SB 272 are planned to be stored for a long period of time, it
is recommended to charge their batteries up to 100% of their capacity. Batteries should
be charged at least every 6 months.
✓
Monitoring station and SB 272 have their own chargers, which are incompatible: SB 270
is a waterproof power supply for SV 271 LITE, whereas SB 273 is an indoor charger for
SB 272.
✓
Before installing the station at the measurement site, make sure that the protective caps
on the four antibird spikes are removed. It is recommended to use the protective caps
during transportation.
