(Used to label position or line)
10.
Ribbon tape
(Used to measure height and length to determine a position)
(II) Detecting instrument
1.
Hydraulic pressure gauge
(Used to test water pressure)
2.
Multimeter
(Used to measure voltage and earthing, etc.)
3.
Test pencil
(Used to test whether it is charged)
(III) Installation materials
PPR hot-water pipe, PPR cold water pipe, elbow pipe, union jointer, double nipple, tee joint, thread
seal tape, etc.
(Used to pipeline connection)
II.
Ambient condition checkup
(I) Requirements for surrounding environment of installation
1.
Avoid keeping near to a position prone to combustible gas leak and a place of storage for
flammable, explosive and corrosive articles;
2.
Keep away from a position with high magnetic field and effect of electric field, preventing
magnetic field affecting the operation of water heater;
3.
The installation site should be more convenient for getting water and power supply, for which the
pipeline distance between water heater and use point shall be shortened as far as possible, so as to
avoid calorific loss due to overlength piping. The socket shall be positioned overhead the product,
avoiding the risk of short circuit due to splashing.
4.
Adopt splashproof measure or socket if the socket is possibly splashed;
5.
Install the product out of kid's touch and keep the socket under use possibly far away from the
place easily accessible to kids;
