● Select the required fan speed by pressing the
button.
Four speeds are available: High / Medium / Low / Auto.
The most suitable temperature for the room during the summer varies from 24
℃
to 27
℃
(75
℉
to 81
℉
).
You are recommended, however, not to set a temperature much below the outdoor temperature. The fan
speed difference is more noticeable when the appliance is under FAN mode but may not be noticeable
under COOL mode.
HEAT mode *
“ * “ means only the heat pump model have this function.
To set this mode correctly:
● Press the
button a number of times until the “Heat” symbol appears.
● Select the target temperature13
℃
-
27
℃
(55
℉
-
81
℉
) by pressing
the
∧
or
∨
button until the corresponding value is displayed.
● Select the required fan speed by pressing the
button.
Four speeds are available: High / Medium / Low / Auto.
● Water is removed from the air and collected in the tank.
● When the tank is full, the appliance shuts down and”
”(full tank) appears on the display. The
tank cap must be extracted and emptied. Run off all water left into a basin. When all the water has
been drained, put the cap back in place.
● When the tank has been emptied, the appliance starts up again.
N.B.: - When operating in very cold rooms, the appliance defreezes automatically, momentarily
interrupting normal operation. ”
”appears on the display. During this operation, it is
normal for the noise made by the appliance to change.
-
In this mode, you may have to wait for a few minutes before the appliance starts giving out hot air.
-
In this mode, the fan may operate for short periods, even though the set temperature has already
been reached.
