WINDOW SLIDER KIT INSTALLATION
1:Parts:
A) Panel
B) Panel with one hole
C) Screw to lock window kit in place
2: Assembly:
Slide Panel B into Panel A and size
to widow width. Windows sizes vary. When
sizing the window width, be sure that the window kit assembly is free from gaps from gaps and/or air
pockets when taking measurements.
3.
Lock the screw into the holes that correspond
With the width that your window requires to ensure that there are no gaps or air pockets in the window kit
assembly after installation.
LOCATION
● The unit should be placed on a firm foundation to minimize
noise and vibration. For safe and secure
positioning. place the unit on a smooth, level floor strong
enough to support the unit.
● The unit has casters to aid placement, but it should only be
rolled on smooth, flat surfaces. Use caution
when rolling on carpeted surfaces. Use caution and Protect
floors when rolling over wood floors. Do not
attempt to roll the unit over objects.
● The unit must be placed within reach of a properly rated
grounded socket.
● Never place any obstacles around the air inlet or outlet of the
unit.
● Allow at least 18”(45cm) of around and above space away from the wall for efficient working.
● The hose can be extended, but it is the best to keep the length to minimum required. Also make sure
that the hose does not have any sharp bends or sags.
