Suzuki SY419, Дополнительное руководство по обслуживанию

Страница: 65 / 240

INSTALLATION
For installation, reverse the removal procedure. However, pay
attention to the following points.
Be sure to clamp hoses securely.
For adjustment of throttle cable, refer to “Injection pump setting:
LUCAS equipment (Non-industrial setting)” in “Overhaul check-
ing tuning manual”.
Connect engine ground cable properly and securely.
Tighten bolts and nuts shown in the figure on the left.
Tightening torque:
(a): 55 N·m (5.5 kg-m)
For installing engine hood, refer to “Hood” in Section 9. And per-
form “hood latch operation check” as indicated below.
Pull primary hood latch release handle inside vehicle. Second-
ary latch should keep hood from operating all the wary when pri-
mary latch is released. Make sure engine hood closes firmly.
Check that there is no leakage of intake air, exhaust gas, engine
coolant and oil.
ENGINE MECHANICAL 6A4-15