Suzuki SMD7, Руководство по установке, Страница: 30 / 43

APPENDIX 1 MENU TREE
AP-6
1
Files Screenshots Screenshots (shows number of screenshots saved to internal memory)
Export to SD
Delete All Screenshots
User Data Export File Format (C-MAP, GPX, CSV )
Routes/Points (Shows number of routes/points
saved to internal memory)
Routes and
Points
Tracks
Settings
Backup
Notifications
Log
Export to SD
Import from SD (select file to import)
Tracks/Track Points (Shows number of routes and
points saved to internal memory)
Export to SD
Export to SD
Export to SD (CSV)
Restore from SD (select file to import)
Import from SD (select file to import)
Units Units
Fuel
Formats and
References
Distance ( NM , SM, km, NM+ft, NM+m, SM+ft)
Rate (l/h, US gal/h , UK gal/h)
Bearing Display (M, T )
Magnetic Variation ( Internal , External)
True Wind Calculation Reference (Ground, Surface )
Position Format ( DD°MM.MMMM’ , DD°MM.MMM’, DD°MM.MM’,
DD°MM’SS.ss”, DD.DDDDDD)
Speed ( kn , km/h, m/s, mph)
Wind Speed ( kn , km/h, m/s, mph, Bft)
Depth (m, ft , fm, pb, HR)
Fish Size (cm, inch )
Air Pressure ( hPa , mBar, mmHg, inchHg)
Oil/Boost Pressure (Bar, PSI, kPa )
Volume (l, US gal , UK gal)
Height/Length (m, ft )
Temperature (°C, °F )
Initial
Setup
Vessel Type (Power Displacement, Power Planing , Sail Boat)
NAVpilot Control (ON, OFF )
GP330B SBAS Mode (ON, OFF )
WS200 SBAS Mode (ON, OFF )
SBAS Mode (ON, OFF )
Heading Offset (-180.0° to +180.0°, 0° )
Pitch Offset (-90.0° to +90.0°, 0° )
Roll Offset (-90.0° to +90.0°, 0° )
Language ( English US , English UK, others)
Vessel
Autopilot
Data
Acquisition
SC-30 Setup
SBAS Mode ( ON , OFF)
Restart GPS
Dynamic Model (
At Sea , Automotive)
Navigation Speed ( Low , High)
Internal
GPS Setup
Position Filter ( Off , Low, Medium, High)
Speed Filter ( Off , Low, Medium, High)
Map Datum ( WGS 1984 , others)
Perspective Angle (5° to 60°, 30° )
Navigation
Setup
2
Restore
Defaults Restore Default Settings (Select Yes/No from pop up window)
1
APPENDIX 1 MENU TREE
AP-7
Manual Management (ON, OFF )
Total Fuel Capacity ( 0 to 9999 US gal)
NMEA Output Instance (0, 1, 2, 3 , 4, 5)
Select IF (Select [IF-NMEAFI] to set the analog data that is input
from the IF-NMEAFI.)
Category (Wind,ST800/ST850, Fuel, Fresh Water, Waste
Water, Live Weel, Oil, Black Water)
Resistance Full (0 ohm to 300 ohm; default: 33.50 ohm )
Resistance Mid (0 ohm to 300 ohm; default: 310.00 ohm )
Resistance Empty (0 ohm to 300 ohm; default: 240.00 ohm )
Capacity ( 0 to 2650 US gal)
Self Test (Starts a diagnotic test)
Refresh (Refresh the NMEA device list)
Software Version
Boot Version
Kernel Version
RootFS Version
C-MAP 4D LIB
Base Chart
Chart 2
PORT/STBD Reversing (ON, OFF )
System
Information About
Rudder
Setup
Manual Fuel
Management
IF NMEA
Setup
Serial Number
Program Version
Boot Version
FPGA Version
FPGA Program Version
About OSS
Copyright
Fish Finder
Information
C-Weather Information
2
Service (For technicians only, requires password)
Clear
Memory
Restore
Defaults Restore Default Settings (Select Yes/No from pop up window)
Restore All to Factory Defaults (Select Yes/No from pop up window)
Clear All Data and Settings (Select Yes/No from pop up window)
1
Engine
Setup Diagnosis Instance (Tests selected engine)
QR Code
Data Reset Reset Data (
Select Yes/No from pop up window )
Installation Number of Engines ( 1 ,2,3,4)
Gateway Settings (Shows the settings of Gateway)
Station Setting (
1st , 2nd, None)
Reset (Shows the settings of Gateway to reset)