INSPECTION AND MAINTENANCE
60A23-09080
ENGINE COOLANT
5) Add just enough specified fluid to fill
the transmission to the proper level. It
takes only 0.35 liters (0.62 Imp pt) for
3-speed automatic transmission or 0.3
liters (0.53 Imp pt) for 4-speed auto-
matic transmission to raise the level
from "LOW COLD" to "FULL COLD"
with a room temperature transmission
or from "LOW HOT" to "FULL HOT"
with a hot transmission.
A CAUTION
After checking or adding oil, be sure
to insert the dipstick securely.
Changing Oil
Since special procedures, materials, and
tools are required to change the auto-
matic transmission oil, it is recommend-
ed that you trust this job to your author-
ized SUZUKI dealer.
Engine Coolant Level Check
Check the engine coolant level at the
reserve tank, not at the radiator. With
the engine cool, the engine coolant level
should be between the "FULL" and
"LOW" marks.
Adding Engine Coolant
If the engine coolant level is below the
"LOW" mark, more engine coolant should
be added. Remove the reserve tank cap
and add engine coolant until the reserve
tank level reaches the "FULL" mark.
Never fill the reserve tank above the
"FULL" mark.
A CAUTION
When adding or replacing engine
coolant, use a high quality ethylene
glycol anti-freeze diluted with dis-
tilled water. The mixture you use
should contain at least a 50% con-
centration of anti-freeze. If a 50%
concentration does not provide
adequate protection against freez-
ing, follow the instructions on the
anti-freeze container to obtain the
desired freezing point.
(Continued)
119
9-14
