manualshive.com logo in svg

Suzuki SE200-M SERIES, Руководство по эксплуатации

Поделиться
Скачать
Suzuki SE200-M SERIES Скачать руководство пользователя страница 4

 

3

Conversions and changes are made at your own risk. 

・

Maintenance, repair and conversion works (see item 5) must be only done by trained technicians or 
qualified personnel.  Only genuine spare parts approved by manufacture should be used for 
repair. 

・

Any work on the electrical equipment must be done by qualified electricians or under direction and 

supervision or qualified personnel. 

・

Works on live parts and equipment under electrical tension is prohibited.    They are only by 

trained technicians or qualified personnel. 

・

The following operations must not be performed until the machine has been disconnected from the 

power supply by switching off the main switch or by pulling out the main plug. 

-

 

Threading needle(s), loopers, spreaders and gimp thread etc. 

-

 

Replacing parts such as needle(s), presser foot/cloth clamp plate, throat plate, needle guard, 
loopers, spreaders, feed dog, fabric guide, knife/blade, cutting block and thread trimmer etc. 

-

 

Leaving the work place unattended. 

-

 

Maintenance work. 

 
      5) Foot switch/optional hand switch 
       

・

Keep the foot switch/optional hand switch dry anytime when in use. 

       

・

Keep the foot switch/optional hand switch clean anytime when in use. 

       

・

Never use the foot switch/optional hand switch if it got wet or the cord of it is damage. 

       

・

Be careful to operate the foot switch/optional hand switch when the select switch is “1(left)” for one 

pedal start.    When the position of select switch is “1(left)”, the machine can starts upon pressing 
the left foot/hand switch only. 

 
      6) Cloth feed table 
       

・

Pay attention to your hand carefully when in opening or closing the cloth feed table. 

       

・

When working the cloth feed table, never touch it or go your hand into a space. 

 
   7) Control box 
       

・

Never open the control box.  Maintenance, repair and conversion works must be only done by 

trained technicians or qualified personnel.   

 
      8) Knife/Cutting block, thread trimmer, thread take-up, needle bar and moving parts 
       

・

When the machine is working, never touch all moving parts such as above. 

       

・

Pay attention to your hand carefully when in use of thread trimmer. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Содержание SE200-M SERIES






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды