23
①
Pull the knob
②
Rotate it
③
Push the knob when the mark (A) align to the mark (B)
④
Test the cutting action in the position of C/O
(A)
(B)
2.
EMERGENCY BUTTON
When in emergency such as thread breakage, needle broken or other
problem while the machine is working, push the emergency button
immediately.
How to recover the machine from emergency stop;
1) Switch off the main switch, wait about 2 ~ 3 sec. and switch on the
main switch again.
2) Press the start and left foot switch at the same time.
The needle bar comes to the highest position and the feed table
returns to the original/start position without sewing, and the cloth
clamp opens/unlocks automatically.
PWR SEW ALM PWR SEW ALM
SPEED CONTROL SPEED CONTROL
Switch off the
MIN MAX main switch, MIN MAX
When pushing the wait for 2~3 sec. All LED are ON Press both foot switches
emergency button and switch on at the same time
All LED are ON/OFF
In case of knife is working:
Pull the knife driving release knob,
rotate its knob to counterclockwise
or clockwise until the mark (A)
align to the mark (B) and push the
knob to the original position. Set
the knife selection knob to C/O,
and test the cutting action.
NOTE:
When the machine is emergency stopped, the cloth clamp does not open/unlock if you press the cloth
clamp lock/unlock of right foot switch for safety reason.
3. ELECTRICITY CURRENT SHUT OFF
If the electricity current is shut off suddenly by some reasons or the switch off the main switch during
the machine is working, the machine stops completely. In case of that : Connect the electricity or switch
on the main switch, press the start and left foot switch at the same time. The needle bar comes to the
highest position and return the cloth feed table to original position without sewing.
