29
REAR/ARRIERE
The procedure to bleed the rear brake is identical to
that of the front.
A: Bleeder valve
FRONT BRAKE LEVER
Remove the lever cover.
Check the brake lever play at the adjuster bolt.
Front brake lever adjuster bolt length:
11–15 mm (0.43–0.59 in)
If adjustment is necessary, carry out the procedure
below:
1. Loosen the lock nut
A
.
2. Turn the adjuster
B
in or out until the correct
length.
3. Tighten the lock nut
A
.
4. Fit the lever cover
C
.
THROTTLE CABLE
Check the throttle cable play at the throttle grip.
Throttle cable play: 2.0–4.0 mm (0.08–0.16 in)
If adjustment is necessary, carry out the procedure
below:
1. Loosen the throttle cable adjuster lock nut
A
.
2. Turn the adjuster
B
in or out until the correct play.
3. Tighten the lock nut
A
while holding the adjuster.
4. Place the rubber boot
C
.
#
After the adjustment is completed, check that
handlebar movement does not raise the
engine idle speed and that the throttle grip
returns smoothly and automatically.
