29
THROTTLE CABLE
Check the throttle cable play at the throttle lever end.
Throttle cable play: 3.0–5.0 mm (0.12–0.20 in)
If adjustment is necessary, carry out the procedure
below:
1. Loosen the throttle cable adjuster lock nut
A
.
2. Turn the adjuster
B
in or out until the correct play.
3. Tighten the lock nut
A
while holding the adjuster
B
. Place the rubber boot
C
.
#
TIRE PRESSURE
Using an accurate air gauge, check the air pressure
of the front and rear tires. The pressure should be as
shown.
COLD INFLATION TIRE PRESSURE
Test ride the vehicle checking all mechanical func-
tions. Tighten all nuts, bolts and miscellaneous
mounting parts to the proper torque specs.
Confirm that all cables and wiring harnesses are con-
nected and routed correctly.
IDLE SPEED ADJUSTMENT
After completing all of the servicing procedures and
the test ride, adjust the engine idle speed by turning
the throttle stop screw.
Engine idle speed: 1 450–1 750 r/min
A: Throttle stop screw
After the adjustment is completed, check that
handlebar movement does not raise the
engine idle speed and that the throttle grip
returns smoothly and automatically.
FRONT
REAR
15 kPa
0.15 kg/cm
2
2.2 psi
20 kPa
0.20 kg/cm
2
2.9 psi
NOTE:
The engine idle should be adjusted with
engine warmed up.
