23
After charging the battery, install the battery in the
vehicle as follows.
!
1. Replace the battery at the original position.
2. First connect the
+
+
+
+
lead to the
+
+
+
+
positive terminal
of the battery.
3. Cover
+
+
+
+
terminal with rubber boot.
4. Connect the
-
-
-
-
lead to the
-
-
-
-
negative terminal of
the battery.
A:
+
lead
B:
-
lead
C: Rubber boot
ENGINE OIL
!
The engine oil tank located under the seat. Check the
oil level. If oil level is low, pour engine oil into the oil
tank.
Engine oil tank capacity: 1.2 L (0.3/0.3 US/lmp gal)
A: Engine oil tank cap
When attaching the wiring harness battery
leads to the battery terminals, observe the cor-
rect polarity.
NOTE:
The terminal bolts and nuts are attached to the
battery.
This vehicle is shipped from factory with the
engine filled with engine oil. Be sure to check
oil level.
NOTE:
Use SUZUKI CCI or CCI SUPER oil. If they are
not available, use a good quality 2-stroke
engine oil rated FC under JASO classification.
