5
Before assembling the vehicle, thoroughly under-
stand the “Safety Check Out” described on page
29.
After completion of assembly, carefully check the
vehicle referring to the “Safety Check Out”, then
deliver the vehicle to the customer.
ASSEMBLY
HANDLEBARS
Loosen the handlebar clamp bolts.
A: Handlebar clamp bolt
Align the dot mark on the handlebars with the mating
surface of the front side of right clamp.
Tighten the handlebar clamp bolts to the specified
torque.
"
Handlebar clamp bolt: 26 N·m (2.6 kgf-m)
A: Flange bolt
B: Flange bolt
C: Dot mark
D: Clamp (Upper)
E: Clamp (Lower)
NOTE:
To install the handlebars correctly, first tighten
the bolt
A
of the front side with specified
torque and then tighten the bolt
B
of the rear
side.
Make sure that the clamp has no clearance at
the front side as shown in the illustration.
FRONT
