29
SAFETY CHECK OUT
ENGINE AND TRANSMISSION
CHASSIS
COLD INFLATION TIRE PRESSURE
ELECTRICALS
ROAD TEST INSPECTION
After completion of the setting-up the vehicle
all the following items should be double-
checked to confirm that the operation and func-
tion of the vehicle are satisfactory. Now, set-
ting-up the vehicle and pre-delivery inspection
have been completed and the vehicle can be
passed to the customer.
ITEM
MEASURE
SPECIFICATIONS
Engine oil
Check/Refill
950 ml
Fuel tank
Drain/Fill
6.0 L
Throttle cable
Check/Adjust
3.0–5.0 mm
Idle r/min
Check/Adjust
1 800–2 000 r/min
Exhaust system
Leakage
Fuel system
connection
Circlip/Leakage
Transmission oil
Check/Leakage
90 ml
ITEM
MEASURE
SPECIFICATIONS
Front brake lever
Check/Adjust
3.0–7.0 mm
Rear/Parking brake
lever
Check/Adjust
3.0–5.0 mm
Drive chain
Lubricate/Check/
Adjust
15–25 mm
Oiling points
All necessary points
Battery
Filling electrolyte
Wiring and cable
Routing/Operation
Wiring connectors
Clean/Tight
Suspensions
Operation
Tighten all nuts and
bolts
Torque those listed
in this manual
Cotter pins and
circlip
Fasteners/Check
Paint and chrome
Inspect/
Wash and polish
Warning label
(For E-19 market)
Select/Stick
Appropriate
language
TIRE PRESSURE
FRONT
REAR
22.5 kPa
0.225 kgf/cm
2
3.3 psi
20 kPa
0.20 kgf/cm
2
2.9 psi
ITEM
CHECK FOR
Switch Operations
Operation
Ignition switch
Engine stop switch
Brake switch
Starter button
Parking brake switch
ITEM
CHECK FOR
Engine
Starting/Acceleration
/Smoothness/Noise
Transmission
Operation/Noise
Drive chain
Operation/Noise
Brake
Front/Rear, Operation/Noise
Steering
Stability
Suspension
Operation
Control cables
Operation/Proper return
Leakage
Fuel/Oil/Exhaust
Rear/Parking brake lever
Operation