Suzuki IGNIS 2022 Series Скачать руководство пользователя страница 25

Страница: 25 / 570

2-1

BEFORE DRIVING

73SB7-01E

Keys

54G489

Your vehicle comes with a pair of identical

keys. Keep the spare key in a safe place.

One key can open all of the locks on the

vehicle.
The key identification number is stamped

on a metal tag provided with the keys or on

the keys. Keep the tag (if equipped) in a

safe place. If you lose your keys, you will

need this number to have new keys made.

Write the number below for your future ref-

erence.

Immobilizer system

This system is designed to help prevent

vehicle theft by electronically disabling the

engine starting system.

The engine can be started only with your

vehicle’s original immobilizer ignition key

or keyless push start system remote con-

troller, which has an electronic identifica-

tion code programmed into it. The key or

remote controller communicates the identi-

fication code to the vehicle when the igni-

tion switch is turned to “ON” position or the

engine switch is pressed to change the

ignition mode to ON. If you need to make

spare keys or remote controllers, see your

SUZUKI dealer. The vehicle must be pro-

grammed with the correct identification

code for the spare. A key made by an ordi-

nary locksmith will not work.

80JM122

If the immobilizer/keyless push start sys-

tem warning light blinks when the ignition

switch is in “ON” position or the ignition

mode is ON, the engine will not start.

NOTE:

• If the immobilizer/keyless push start sys-

tem warning light blinks or comes on, a

message may be shown on the informa-

tion display.

• This immobilizer system is maintenance-

free.

For vehicles without a keyless push

start system

If this light blinks, turn the ignition switch to

“LOCK” position, and then turn it back to

“ON” position.

If the light still blinks after the ignition

switch is turned back to “ON” position,

there may be something wrong with your

key or with the immobilizer system. Ask

your SUZUKI dealer to have the system

inspected.

KEY NUMBER:

EXAMPLE

NOTICE

Do not modify or remove the immobi-

lizer system. If modified or removed,

the system cannot be properly oper-

ated.

Содержание IGNIS 2022 Series



























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание IGNIS 2022 Series

Отзывы:

Бренды по названию

Популярные бренды

Suzuki IGNIS 2022 Series, Руководство пользователя

Результаты поиска

Содержание IGNIS 2022 Series

Отзывы:

Бренды по названию

Популярные бренды