Suzuki GSF600K1 2001, Руководство по обслуживанию

Страница: 69 / 380

ENGINE 3-31
• Install the right oil pipe
A
with the bolt
1
.
• Install the copper washers onto bolts
9
and
A
.
• Install the two allen bolts at position
B
.
• Install the ten crankcase bolts (8 mm).
• Tighten the crankcase bolts (crankshaft tightening bolts) in as-
cending order. Tighten each bolt a little at a time to equalize the
pressure.
"
Crankcase bolt (M8)
(Initial): 13 N.m (1.3 kgf.m, 9.5 lb-ft)
(Final) : 23 N.m (2.3 kgf.m, 16.5 lb-ft)
• Tighten the main oil gallery plug
1
to the specified torque.
$
Replace the O-ring with a new one.
(
09900-00410: Hexagon wrench set
"
Main oil gallery plug: 40 N.m (4.0 kgf.m, 29.0 lb-ft)
• Tighten the lower and upper crankcase bolts (6 mm) and nuts
to the specified torque.
"
Crankcase bolt and nut (M6)
(Initial): 6 N.m (0.6 kgf.m, 4.5 lb-ft)
(Final) : 11 N.m (1.1 kgf.m, 8.0 lb-ft)
NOTE:
* Install a new gasket washer at position
2
.
* After tightening the upper crankcase bolt
D
, install the plug
C
.
* Install the engine ground wire
3
into the correct position as
shown.
$
Use a new gasket washer to prevent oil leakage.