Suzuki Canvas SQ416, Руководство по обслуживанию

Страница: 311 / 731

J2
ESCUDO
1. Brake back plate
2. Cable stopper ring
3. Brake cable
1. Wheel bearing retainer nut
PARKING AND REAR BRAKE 5C-13
4) Install bleeder plug cap taken off from pipe back to bleeder plug.
5) For procedure hereafter, refer to steps 1) to 5) of BRAKE SHOE
INSTALLATION.
NOTE:
Be sure to bleed brake system. (for bleeding operation, see
page 5-7)
BRAKE BACK PLATE
REMOVAL
1) Perform steps 1) to 5) of BRAKE DRUM REMOVAL on page
5C-7.
2) Perform steps 2) to 4) of BRAKE SHOE REMOVAL on page
5C-9.
3) Perform steps 3) and 4) of WHEEL CYLINDER REMOVAL on
page 5C-12.
4) Remove cable from brake back plate by squeezing parking
brake cable stopper ring.
5) Drain rear differential gear oil.
6) Remove wheel bearing retainer nuts from rear axle housing.
7) Using special tools, draw out rear axle shaft with brake back
plate.
Special Tool
(A): 09943-35512
(B): 09942-15510