Suzuki Burgman Series, Руководство пользователя

Страница: 99 / 141

7-28
Final Gear Oil Replacement
1. Place the motorcycle on level
ground on the center stand.
Hold the motorcycle vertically
and check the final gear oil.
2. Remove the bolts and final
gear case cover
1
.
3. Place an oil pan below the final
gear case.
4. Remove the oil drain plug
2
and oil level plug
3
.
5. Tighten the oil drain plug
2
and pour fresh oil through the
oil level hole until the oil level
reaches the oil level hole.
6. Tighten the oil level plug
3
.
NOTE: Recycle or properly dis-
pose of used oil.

WARNING
Operating the motorcycle with
too little final gear oil can
cause the final drive unit to
lock up and cause an accident.
Check for leaks and the correct
level of final gear oil before
each use. Add oil if necessary.
Tighten the drain plug securely
after changing the gear oil.

WARNING
Children and pets may be
harmed by swallowing new or
used oil. Repeated, prolonged
contact with used engine oil may
cause skin cancer. Brief contact
with oil may irritate skin.
Keep new and used oil away
from children and pets. To min-
imize your exposure to used
oil, wear a long-sleeve shirt
and moisture-proof gloves
(such as dishwashing gloves)
when changing oil. If oil con-
tacts your skin, wash thor-
oughly with soap and water.
Launder any clothing or rags if
wet with oil. Recycle or prop-
erly dispose of used oil.