4-3
ALLOW THE ENGINE OIL TO
CIRCULATE BEFORE RIDING
Allow sufficient idling time after
warm or cold engine start-up
before applying load or revving
the engine. This allows time for
the lubricating oil to reach all criti-
cal engine components.
OBSERVE YOUR FIRST AND
MOST CRITICAL SERVICE
The 1000 km (600 miles) service
is the most important service your
motorcycle will receive. During
break-in all of the engine compo-
nents will have worn in and all of
the other parts will have seated in.
All adjustments will be restored,
all fasteners will be tightened, and
the dirty oil will be replaced.
Timely performance of the
1000 km (600 miles) service will
ensure optimum service life and
performance from the engine.
NOTE: The 1000 km (600 miles)
service should be performed as
outlined in the Maintenance
Schedule section of this Owner’s
Manual. Pay particular attention to
the caution and warning mes-
sages in MAINTENANCE
SCHEDULE section.
INSPECTION BEFORE RIDING
WARNING
Failure to inspect your motor-
cycle before riding and to prop-
erly maintain your motorcycle
increases the chances of an
accident or equipment dam-
age.
Always inspect your motorcy-
cle each time you use it to
make sure it is in safe operat-
ing condition. Refer to the
INSPECTION AND MAINTE-
NANCE section in this owner’s
manual.
WARNING
If you operate this motorcycle
with improper tires or improper
or uneven tire pressure, you
may lose control of the motor-
cycle. This will increase your
risk of an accident.
Always use tires of the size and
type specified in this owner’s
manual. Always maintain
proper tire pressure as
described in the INSPECTION
AND MAINTENANCE section.
Содержание Burgman Series
