Suzuki Baleno, Руководство пользователя

Страница: 254 / 468

3-95
OPERATING YOUR VEHICLE
68PM2-01E
NOTE:
• If the low tire pressure warning light
comes on, the information display will be
switched to “Tyre Press” display and the
corresponding tire pressure indication
blinks to alert you which tire(s) is(are)
low pressure.
• The display may not show the tire infla-
tion pressure for about 10 minutes after
the vehicle begins to move. This is
because the TPMS system learns the
tire inflation pressure within this 10 min-
utes. The display will show the tire infla-
tion pressure after 10 minutes passed.
• If you stop the vehicle and change the
ignition mode to “LOCK” (OFF), and
leave it for 20 minutes or more, tire pres-
sure will be reset and will be indicated as
0 kPa when the engine is restarted. In
this case, the current tire pressure indi-
cation will recover after driving for a
while. However, if any of tire pressures
has been detected as low pressure
before stopping the engine, the tire pres-
sure indication may not recover and may
be indicated as “---”.
To set the initial value of tire pressure
68PM00352
1) When the ignition mode is “ON” and the
vehicle is stationary, push and hold the
indicator selector knob (1) on the instru-
ment cluster for more than 3 seconds to
change the information display to the
setting mode.
68PM00356
2) Turn the indicator selector knob (1) left
or right to select “TPMS” and push the
indicator selector knob.
NOTE:
If you exit the setting mode, select “Back”
and push the indicator selector knob (1).
(1)
EXAMPLE
EXAMPLE