Suzuki Baleno, Руководство пользователя

Страница: 146 / 468

2-127
BEFORE DRIVING
68PM2-01E
Guide me light (vehicle with auto-
matic lights operation (if equipped))
To home function
This function turns on the front position
lights and the headlights in the low beam
setting for about 10 seconds after the igni-
tion switch is turned to “LOCK” position or
the engine switch is pressed to change the
ignition mode to “LOCK” (OFF).
To set the function:
1) Turn the lighting switch to “AUTO” posi-
tion
2) Turn the ignition switch to “LOCK” posi-
tion or press the engine switch to
change the ignition mode to “LOCK”
(OFF).
3) Pull the lighting control lever toward
you once and open the driver’s side
door within 60 seconds. Or pull the
lighting control lever toward you once
while the driver’s side door is open.
To cancel the function:
Perform any of the following operations.
• Pull the lighting control lever toward you
once.
• Turn the ignition switch to “ACC” or “ON”
position or change the ignition mode to
“ACC” or “ON” by pressing the engine
switch.
• Turn the lighting switch to any other
position than “AUTO” position.
NOTE:
• When the “To home” is functioning, the
front fog lights and the headlights (high
beam) are not turned on.
• Lighting time of the “To home” function
can be changed on the information dis-
play. Refer to “Information display” in this
section.
To car function
If “UNLOCK” button of the remote control-
ler is pressed while the lighting switch is
positioned in “AUTO”, the front position
lights and the headlights in the low beam
are turned on for 10 seconds.
This function will operate only when it is
dark outside the vehicle.
To cancel the function:
Perform any of the following operations.
• Lock the doors by using the remote con-
troller or request switch, or the key in the
driver’s door lock.
• Turn the ignition switch to “ACC” or “ON”
position or change the ignition mode to
“ACC” or “ON” by pressing the engine
switch.
• Turn the lighting switch to any other
position than “AUTO” position.
NOTE:
• When the “To car” is functioning, the
front fog lights and the headlights (high
beam) are not turned on.
• Lighting time of the “To car” function can
be changed on the information display.
Refer to “Information display” in this sec-
tion.