Suzuki AVB413D Скачать руководство пользователя страница 65

Страница: 65 / 340

2-44

BEFORE DRIVING

79MH0-74E

NOTE:
The indicated maximum value of the trip
meter is 9999.9. When you run past the
maximum value, the indicated value will
return to 0.0.

Instantaneous Fuel Consumption

If you selected instantaneous fuel con-
sumption the last time you drove the vehi-
cle, the display does not show the last
value of instantaneous fuel consumption
from previous driving when the ignition
switch is turned to the “ON” position or the
engine switch is pressed to change the
ignition mode to “ON”. The display shows
the value only when the vehicle is moving.

NOTE:
• The display does not show the value

unless the vehicle is moving.

• Depending on the vehicle’s specification,

the fuel consumption units of initial set-
ting are indicated as L/100km or km/L.

• For “L/100km” or “km/L” setting, the indi-

cated maximum value of instantaneous
fuel consumption is 30. No more than 30
will be indicated on the display even if
the actual instantaneous fuel consump-
tion is higher.

• The indication on the display may be

delayed if fuel consumption is greatly
affected by driving conditions.

• The display shows estimated values.

Indications may not be the same as
actual values.

• For “L/100km” or “km/L” setting, you can

change the units that instantaneous fuel
consumption is displayed in. Refer to
“Average fuel consumption” in this sec-
tion.

Average fuel consumption

If you selected average fuel consumption
the last time you drove the vehicle, the dis-
play shows the last value of average fuel
consumption from previous driving when
the ignition switch is turned to the “ON”
position or the engine switch is pressed to
change the ignition mode to “ON”. Unless
you reset the value of average fuel con-
sumption, the display indicates the value of
average fuel consumption which includes
average fuel consumption during previous
driving.

To reset the average fuel consumption to
zero, push and hold the indicator selector
knob (3) for a while when the display
shows the average fuel consumption.

NOTE:
When you reset the indication or reconnect
the negative (–) terminal to the battery, the
value of average fuel consumption will be
shown after driving for a while.

(For “L/100km” or “km/L” setting)

To change the unit of average fuel con-
sumption, while pushing and holding the
trip meter selector knob (2), turn the indica-
tor selector knob (3).

68LM262

NOTE:
• When you change the units that average

fuel consumption is displayed in, the
instantaneous fuel consumption units will
be changed automatically.

• When you reconnect the negative (–)

terminal to the battery, the unit of the
average fuel consumption will be reini-
tialized. Change the unit again to your
preference.

Driving range

If you selected driving range the last time
you drove the vehicle, the display indicates
“

---

” for a few seconds and then indicates

the current driving range when the ignition
switch is turned to the “ON” position or the
engine switch is pressed to change the
ignition mode to “ON”.

EXAMPLE