30 AN650A/K7 (’07-MODEL)
ISC VALVE PRE-SET
When removing or replacing the ISC valve, set the ISC valve in
the following procedures:
1) Turn the ignition switch ON.
2) Set up the SDS tool. (Refer to the SDS operation manual for
further details.)
3) Click “Active control”.
4) Click “ISC learned value reset”
1
.
5) Click “Reset” button
2
to clear the ISC learned value.
NOTE:
The learned value of the ISC valve is set at PRE-SET position.
6) Close the SDS tool.
7) Turn the ignition switch OFF.
NOTE:
The ISC valve opening initialization is automatically started after
the ignition switch is turned OFF.
SA
MP
LE
Содержание AN650/A
