Suzuki AN650/A, Дополнительное руководство по обслуживанию

Страница: 33 / 62

32 AN650A/K7 (’07-MODEL)
• Click “Active control”.
• Click “ISC air volume control”
1
.
• Click “ON”
2
to fix the ISC air volume of two cylinders.
NOTE:
When making this synchronization, be sure that the water tem-
perature is within 80 – 100 °C (176 – 212 °F).
A
Engine speed: Approx. 1 200 rpm
B
ISC valve position: Approx. 75 step
• Check for the synchronization of vacuum of #1 and #2 cylin-
ders.
• Equalize the vacuum of the cylinders by turning each air
screw
3
and keep it running at idling speed.
NOTE:
Always set the engine rpm at idle rpm.
• If the adjustment is not yet correct, remove each air screw
and clean them with a spray-type carburetor cleaner and blow
dry with a compressed air. Also, clean the air screw passage-
ways.
NOTE:
* Slowly turn the air screw clockwise and count the number of
turns until the screw is lightly seated.
* Make a note of how many turns were made so the screw can
be reset correctly after cleaning.
• Repeat the procedures of Step 2.
• Disconnect the vacuum tester and install the removed parts.
• After completing the throttle valve synchronization, clear the
DTC and reset the ISC learned value using SDS tool.
(
#
Page 30)
SA
MP
LE