Suzuki 2006 GSR600, Руководство по обслуживанию

Страница: 37 / 230

2-20 PERIODIC MAINTENANCE
• Count out 21 pins (20 pitches) on the chain and measure the
distance between the two points. If the distance exceeds the
service limit, the chain must be replaced.

Drive chain 20-pitch length:
Service limit: 336.5 mm
ADJUSTING
• Loosen or tighten both chain adjuster bolts
1
until there is 20
– 30 mm of slack at the middle of the chain between the
engine and rear sprockets as shown. The chain adjuster posi-
tion relative to the reference marks
A
on both sides of the
swingarm must be equal to ensure that the front and rear
wheels are correctly aligned.

Drive chain slack:
Standard: 20 – 30 mm
• Place the motorcycle on its side-stand for accurate adjust-
ment.
• After adjusting the drive chain, tighten the axle nut
2
to the
specified torque.
• Tighten both chain adjuster lock-nuts
3
securely.

Rear axle nut: 100 N·m (10.0 kgf-m)
• Recheck the drive chain slack after tightening the axle nut.
1 2 3 19 20 21
20 – 30 mm