Sutter CURIS 36 0 00-01, Инструкция по эксплуатации

Страница: 16 / 48

CURIS
®
Instructions for Use
12
to the instructions for use. The automatically selected current type and output have to
be checked for plausibility.
When instruments are detected automatically, programs (buttons P1 through P4) can only be
loaded and saved within the parameters assigned to the respective instrument.
5.6.5 Operating mode selection
Select the desired operating mode before using the device.
The CURIS
®
has the following operating modes:
MONOPOLAR
for monopolar
electrodes
Cutting
yellow selection
buttons
CUT 1 (5) Smooth cut with no coagulation zone.
CUT 2 (7) Cutting current with coagulation zone.
Coagulation
blue selection buttons
CONTACT (4) Contact coagulation, coagulation with
depth effect on direct contact between the
electrode and tissue.
SOFTSPRAY (6) Spray coagulation, coagulation current with
low depth effect for surface coagulation
with sparks (fulguration).
BIPOLAR
for bipolar
electrodes
Cutting
yellow selection
buttons
BICUT 1 (10) Smooth cut with no coagulation zone.
BICUT 2 (12) Cutting current with coagulation zone.
EXCISE (14) For the use of, for example, ring forceps.
Coagulation
blue selection buttons
MACRO (9) Bipolar coagulation, local contact
coagulation in the area of the bipolar
electrode pair.
PRECISE (11) Bipolar coagulation with fine electrodes,
local contact coagulation in the area of the
bipolar electrode pair.
RaVoR™ (13) Bipolar radio frequency volume reduction,
for instance in snore therapy. In this
operating mode, the device operates
automatically with the special AUTO STOP
function. The AUTO START and STANDARD
special functions are not supported with
RaVoR™. AUTO STOP cannot be turned off.
5.6.6 Setting the output power
Set the output power for cutting and coagulation using the control dials
on the front of the device.
Control dial (17) and output display (16) for the CUT operating modes
(cutting):
CUT 1, CUT 2, BICUT 1, BICUT 2, EXCISE