Sutter Instrument SmartShutter Lambda SC, Руководство по эксплуатации

Страница: 55 / 90

LAMBDA SC OPERATION MANUAL – REV. 1.14C (20190606)
47
12.1.2 Interactive USB Device Driver Installation (Windows Only)
Once the USB “host” connector is inserted into the appropriate receptacle on the remote
computer, the Windows operating system should immediately start the “new USB device”
detection process. The following message box should appear on your screen:
Figure 12-5 -- New USB device detected message box.
The above message box will display for a period of time, possibly up to a couple of minutes,
while Windows goes through the process of determining if it already has device driver
information for this new device.
If the Lambda SC USB device drivers have already been installed on this computer, then
Windows will usually find them and automatically reactivate them. If the drivers had been
previously installed and then removed (uninstalled), it is possible that Windows is still able to
locate the drivers and automatically reinstall them. Windows may also automatically install
the appropriate drivers if another Sutter Instrument Company instrument with a USB
interface (such as a Lambda 10-3, a Lambda 10-B, an MPC-200, or even another Lambda SC)
is already connected and configured with your computer. If this is the first time the Lambda
SC USB device drivers are being installed, it is then quite likely that Windows will display
the dialog box shown in the following figure.
Figure 12-6 -- Digital Signature dialog box.