Sutter Instrument SmartShutter Lambda SC, Руководство по эксплуатации

Страница: 11 / 90

LAMBDA SC OPERATION MANUAL – REV. 1.14C (20190606)
3
2. SAFETY WARNING


Replace fuse only with the same type and rating:
5 x 20 mm glass tube, T1.0A, 250V, IEC 60127-2, Sheet III
(such as a Bussmann GDC-1A or Littelfuse 218 001)

To prevent fire or shock hazard do not expose the unit to rain or moisture.

To avoid electrical shock and exposure to hazardous electrical voltages:
Do not disassemble the unit. Refer servicing to qualified personnel.
Always use the grounded power supply cord set provided to connect the unit to a
grounded outlet (3-prong). This is required to protect you from injury in the event that
an electrical hazard develops.
2.1 Safety Considerations when Using High-Intensity Light Sources
Failure to comply with any of the following precautions may result in injury to the users of
this device as well as those working in the general area near the device.

Never look into the optical pathway of the high intensity light sources typically used with
this instrument. Doing so can cause permanent eye damage.

The high-intensity light sources typically used with this instrument also produce a
significant amount of heat. Direct contact with the housing of those instruments can
cause serious burns.
2.2 The
SmartShutter is Not a Safety Shutter
Sutter Instrument Co.’s
Smart
Shutter is
not
intended to be a ‘safety shutter.’ A safety
shutter usually closes automatically in the event of a power failure and is designed with the
primary goal of ensuring that it will not allow any unintended exposure. For laser safety
applications, a shutter is normally designed so that no single component failure allows an
unintended exposure to the laser beam. The
Smart
Shutter is intended for use in the
controlling of light in scientific and industrial applications. The
Smart
Shutter was designed
for high performance and durability, but without certain features that would be desirable in a
safety shutter application.