APPLICATION NOTE
TELULAR SX5 SERIES PHONE CELL & XPERT2/9210B SPEECH MODEM (OR 8210-3014 MODEM)
18
S00:001 S02:043 S06:002 S07:050 S08:002 S09:006 S10:014 S11:095 S12:050 S18:000
S36:007 S40:104 S41:195 S46:138 S95:000
STORED PROFILE 1:
B1 E1 L1 M1 N0 Q0 T V1 W0 X4 Y0 &C1 &D2 &G0 &J0 &K3 &Q5 &R1 &S0 &T5 &X0
S00:000 S02:043 S06:002 S07:050 S08:002 S09:006 S10:014 S11:095 S12:050 S18:000
S36:007 S40:104 S41:195 S46:138 S95:000
TELEPHONE
NUMBERS:
0= 1=
2= 3=
Type following configuration string into the modem using HyperTerminal.
ATS0=2
ATE0Q1&D0&W
The configured modem will NOT respond to normal AT commands at this point.
However, the modem will retain the settings.
Disconnect the PC and connect the cable to the 8210 external serial port USING THE
NULL MODEM adapter on the modem end.
Connect the RJ11 cable from the FWT RJ11 jack to the modems RJ11 jack.
From a remote location, call the Telular FWT at the associated 10 digit number with a
communication program like HyperTerminal. Set HyperTerminal as follows: 8 bits, No
parity, 1 stop bit, Flow control=NONE, Terminal emulation=VT100.
When communication with the 8210 is established, press ENTER a couple of times and
the opening menu should be displayed.
The 9210 voice modem is now configured for data mode.
