POSITION WEbbINg STRAPS
Place boat in position under system. Place Webbing
Straps (E) under boat to be lifted. Push buckles
together to lock.
e. adJusting lifting system
ALIgN ScREW EyES
LEVEL bOAT
All webbing straps and ropes must have equal tension
to keep boat level. Check by slowly pulling the
Black/Yellow Hoisting Rope (F).
To level boat, adjust tension by moving knot or
adjusting webbing strap at buckle.
Diagram 19.
Using free end of rope from Webbing Strap
eye, retrace original figure-eight knot in reverse. Tightly
cinch all four strands of rope exiting the knot.
tighten knots.
Diagram 20.
Align Pigtail Lag Screws in direction of rope
running through Pulley.
Diagram 18.
Tie a Black Drop Rope to each Webbing Strap
(E) using a figure-eight knot. Pass free end of rope through
the sewn Webbing Strap eye.
Tie knots below top of object
so load can be lifted to ceiling.
OBJECT
CEILING
Diagram 17.
Tie knots below top of boat so boat can be
lifted to ceiling.
1
2
3
4
5
6
7
Webbing Strap Eye
8
Webbing Strap Eye
9
10
11
12
13
14
15
c. install RoPe
d. attach stRaPs to RoPe
TIE ROPE TO WEbbINg STRAPS
Keep knot as close to Webbing Strap (E) eye as
possible.
steP 5 continued: assemble hoisteR system
Long
Drop
Rope
Long
Drop
Rope
Short Drop
Rope
Short Drop
Rope
ORGANIZER
PULLEY
PULLEY
PULLEY
PULLEY
BLOCK & TACKLE
FRONT WALL
GARAGE DOOR
TOP PLATE
Diagram 16.
Put all four Black Drop Ropes through Organizer.
Put two shorter Black Drop Ropes through Pulleys (D) on
mounting board with Rope Organizer.
Put two longer Black Drop Ropes through Pulleys (D) on
remaining mounting board.
(D)
(D)
(D)
(D)
