b. attach Pulleys
Place one Pulley (D) on each Pigtail Lag Screw (B).
INSTALL WELDED ScREW EyE (A) ON FRONT WALL
Use stud finder to locate solid wood of top plate. Drill
7/32" (5.5 mm) hole. Screw Welded Screw Eye (A) into
top plate of front wall (near top of ceiling).
Diagram 15.
Single black/yellow
hoisting rope must face down.
*Note:
Appearance of Cleat
(G1) varies by system size.
Refer to system part number
for specific Block and Tackle
Cleat.
TOP PLATE OF FRONT WALL
Front View
STUDS
Diagram 14.
Top plate of front wall.
Shackle (C)
Single Black/Yellow
Hoisting Rope (F)
Block and Tackle Cleat (G1)*
7801bSZ
7802bSZ
7803bSZ
7806
steP 5 continued: assemble hoisteR system
Front
Wall
Ceiling
Diagram 13.
Avoid installing Welded Screw Eye above tall
shelves. See Diagram 21 (Open).
ATTAcH bLOck AND TAckLE (g)
Attach Block and Tackle system (G) to welded Screw
Eye (A) with Shackle (C). Remove ring from shackle
like a key ring. Put pin through top of Cleat (G1).
Put ring back on to secure Shackle (C).
