Installation
VariFrame – Assembly Instructions
page 20
5.3.2
Installation of the table base frame
The following requirements must be met for the assembly of the table base frame (VariFrame table
frame and ELS3 lifting columns) with a customized tabletop to form a fully assembled table:
The table base frame is suitable for tabletops with a depth of 600 mm – 800 mm, see
figure 10.
The tabletop should not protrude more than 100mm on the longitudinal side over the
table base frame, see figure 10.
The tabletop should not protrude more than 130 mm on the narrow side over the
table base frame, see figure 10.
The table base frame may be loaded by a maximum of 90 kg. This load is the
combined total of the tabletop weight and the additional load on the tabletop, such
as a computer screen and keyboard, etc.
The maximum load of 90 kg must be distributed evenly on the tabletop.
Figure 10 Alignment of the table base frame with the tabletop
