P/N: 670-00029A
2/17/12
18
7.4 Cross Beam Installation
•
Fasten cross beam bracket to cross beam using (2) #14-3/4 tapping screws. The
tapping screws require a #3 Phillips drive style. Please note that the function of
the tapping screw is to cut threads into the cross beam as the screw is driven into
the material.
•
Repeat for second cross beam bracket installation on opposite end of cross beam.
•
Insert 1/4”-20 flat head cap screw into outer cross beam bracket holes. The flat
head cap screws require a 5/32” hex socket drive style for installation.
•
Thread 1/4"-20 hex nut onto each flat head screw, leaving approximately 4mm of
the screw thread exposed. Repeat procedure on opposite end of cross beam.
