SusiAir PILATUS PORTER PC6, Программа технического обслуживания

Страница: 197 / 248

Form ASI-PC6 Engine Preservation (Engine Inactive 8-28 Days)
Reissued: 2
Revision: 1
Date: July 2020 Page 1 of 1
MAINTENANCE PROGRAM
PILATUS PORTER PC6
Ref.EMM PT6A-27 Chapter 72-00-00
PILATUS PC6 – ENGINE PRESERVATION
(Engine Inactive 8-28 days)
Aircraft
Registration
: ……………. Job Number : …………….
Aircraft S/N : …………….
NO. DESCRIPTION TASK NO. MECH. ENG. RII
1.
Engines inactive 0 to 7 days.
(a) If the engine was operated in a salt laden environment, do a
compressor and turbine desalination wash.
N/A
(b) Engine may remain inactive with no preservation protection provided
engine is sheltered, humidity is not excessively high and there is not
extreme temperature changes that may produce condensation.
N/A
(c) Install inlet and exhaust covers. N/A
2.
Place desiccant bags and humidity indicator on wooden racks in engine
exhaust duct only.
N/A
3.
Seal off all engine openings. Make sure exhaust cover has suitable
window to monitor humidity indicators.
N/A
4.
Check relative humidity every two weeks if engine is stored outside, and
every 28 days if engine is stored inside. Relative humidity should be
maintained at 40%. If humidity indicator turns pink, replace desiccant
bags and indicator, find the reason for humidity and remove the source of
humidity.
N/A
MAINTENANCE RELEASE
I hereby certify that aircraft parts and component mentioned above has been inspected and maintained in
accordance with the Maintenance Program and meets requirements of applicable Civil Aviation Safety
Regulations that is determined to be in an airworthy condition.
Name : .......................................
Signature : .......................................
Authorization Card’s No. : .......................................
Date : .......................................