Surtek TRH5, Быстрый старт

Страница: 8 / 12

8
FEATURES
KNOW YOUR TOOL
Before attempting to use this product, become
familiar with all of its operating features and
safety requirements.
TECHNICAL DATA
TRH5
CAPACITY
11 023 lb
OVERALL WIDTH 27"
DISTANCE BETWEEN FORKS 14-3/8"
FORKS WIDTH 7"
FORKS LENGTH 48"
TOTAL HEIGHT 48-7/16"
STRUCTURE HEIGHT 16-9/16"
MINUMUM LIFTING HEIGHT 3"
MAXIMUM LIFTING HEIGHT 7-1/4"
WHEEL DIAMETER 7"
ROLLERS DIAMETER 3-1/8"
TRHB15
CAPACITY
3 307 lb
OVERALL WIDTH 21-1/4"
DISTANCE BETWEEN FORKS 8-11/16"
FORKS WIDTH 6-5/16"
FORKS LENGTH 45-1/4"
TOTAL HEIGHT 48-7/16"
STRUCTURE HEIGHT 16-9/16"
MINUMUM LIFTING HEIGHT 2"
MAXIMUM LIFTING HEIGHT 6-1/2"
WHEEL DIAMETER 7"
ROLLERS DIAMETER 2-1/4"
TRHD15
CAPACITY
3 307 lb
OVERALL WIDTH 27"
DISTANCE BETWEEN FORKS 14-3/8"
FORKS WIDTH 6-5/16"
FORKS LENGTH 48"
TOTAL HEIGHT 48-7/16"
STRUCTURE HEIGHT 14"
MINUMUM LIFTING HEIGHT 3-5/16"
MAXIMUM LIFTING HEIGHT 8-1/4"
WHEEL DIAMETER 7-7/8"
ROLLERS DIAMETER 2-9/16"
TRHL35
CAPACITY
7 716 lb
OVERALL WIDTH 27"
DISTANCE BETWEEN FORKS 14-3/8"
FORKS WIDTH 6-5/16"
FORKS LENGTH 70-7/8"
TOTAL HEIGHT 48-7/16"
STRUCTURE HEIGHT 14"
MINUMUM LIFTING HEIGHT 3-5/16"
MAXIMUM LIFTING HEIGHT 7-7/8"
WHEEL DIAMETER 7-7/8"
ROLLERS DIAMETER 3-1/8"
TRHLI2
CAPACITY
4 409 lb
OVERALL WIDTH 27"
DISTANCE BETWEEN FORKS 14-3/8"
FORKS WIDTH 6-5/16"
FORKS LENGTH 48"
TOTAL HEIGHT 48-7/16"
STRUCTURE HEIGHT 16-9/16"
MINUMUM LIFTING HEIGHT 3"
MAXIMUM LIFTING HEIGHT 7-1/2"
WHEEL DIAMETER 7"
ROLLERS DIAMETER 2-7/8"
OPERATION INSTRUCTIONS
ATTACHING DRAW-BAR TO PUMP UNIT
If you have purchased a wooden box of pallet
truck, some assembly is required. Certainly, you
need some tools, a hammer, a pliers, a spanner,
etc; and some parts, one axle with hole , two
elastic pins (Note one is in the axle ), these parts
are putted in a plastic bag, which is putted into
the draw-bar.
NOTE: The number of draw-bar and pump
should be the same.
1. DRAW-BAR.
2. PIN.
3. AXLE WITH HOLE.
4. ELASTIC PIN.
5. FORK FRAME.
When attaching the handle, you had better
squat just behind the pallet truck. Then you:
1. Insert the draw-
bar into the pump
piston, then use a
hammer to insert
the axle with hole
into the hydraulic
pump and draw-bar
from the right to left. (See fig. 2 ).
Fig.2
Fig.1