Surtek LP707 Скачать руководство пользователя страница 9

9

E N G L I S H •

User's manual

 IMPORTANT: This appliance is not intended 

for use by persons (including children) with re-
duced physical, sensory or mental capabilities 
may be different or reduced, or lack of experi-
ence or knowledge, unless such persons are su-
pervised or trained to operate the product by 
a person responsible for their safety. Children 
should be supervised to ensure they do not use 
the devices as toys.

TOOL USE AND CARE

Do not force the power tool. Use the correct 
tool for the application.
 The correct tool will 
do the job better and more safely at the rate 
that it was designed to work at.
Do not use tools if switch does not turn it on 
or off.
 Any tool that cannot be controlled with 
the switch is dangerous and must be repaired.
Disconnect the plug from the power source 
before making any adjustments, changing ac-
cessories or storing the tool.
 This preventive 
safety measures reduce the risk of accidental 
starting of the tool.
When the power tool is not in use, store it out 
of the reach of children, and do not allow in-
dividuals who are not familiar with the power 
tool or these instructions to operate it.
 Power 
tools are dangerous in the hands on untrained 
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts, 
and any other condition that may affect the 
operation of the power tool. 
If it is damaged, 
have it repaired before using. Many accidents 
are caused by poorly maintained power tools.
Check for misalignment or bonding of moving 
parts, breakage parts, and any other condition 
that may affect the tools operation.
 If you find 
a damaged tool, take it to service before use it. 
Use only accessories that are recommended by 
the manufacturer of your model.
 Suitable ac-
cessories for one tool, may become hazardous 
when are used on another tool.
Keep cutting tools, sharpened and clean. Cut-
ting tools in good condition with sharpened 
edges, are less likely to stuck in workpieces or 
easier to control.
Is recommendable to use a safety device suit-
able, such a thermal and differential switch 
when you are using an electric equipment.

SERVICE

Tool service must be performed only by quali-
fied repair personnel. Service or maintenance 
performed by unqualified personnel could re-
sult in a risk of injury.

SPECIFIC SAFETY RULES FOR 

ANGLE POLISHER

• Use clamps, or another practical way to in-
sure and support the work piece to a stable 
base. Holding the work piece by hand or 
against your body is unstable and may cause 
loss of control.
•  Maintain tools with care. Keep cutting tools 
sharp and clean. Properly maintained tools, 
with sharp cutting edges are less likely to be 
interlocked and are easier to control.

FEATURES

KNOW YOUR TOOL

Before attempting to use this product, become 
familiar with all of its operating features and 
safety requirements.

1. SPINDLE LOCK BUTTON.
2. ”D” AUXILIARY HANDLE.
3. SPEED CONTROLLER.
4. ON/OFF SWITCH.
5. UNLOCK/LOCK BUTTON.
6. POLISHING PLATE AND WOOLEN PAD.

ASSEMBLY INSTRUCTIONS

 CAUTION: Always be sure that the tool is 

switched off and unplugged before carrying 
out any work on the tool. 

FITTING ”D” AUXILIARY HANDLE
Always install the auxiliary handle on the 
tool before operation. 

6

2

4

3

5

1

LP707 manual.indd   9

17/03/17   14:26

Содержание LP707













Отзывы: