Surround Air XJ-3800, Инструкция по эксплуатации, Страница: 6 / 14

Explanation of Indicators
UV/Negative Ion Indicator
When the UV lamp and ionizer are working properly, the blue indicator will gradually change from
bright to dim and from dim back to bright every 5 seconds.
Odor Indicator
The odor indicator will glow whenever the odor sensor detects odor (such as indoor smoke).
Dust and Allergen Indicator
The dust-and-allergen indicator will glow whenever dust or other allergens are detected.
Clean Air Monitor
Whenever odor, dust, or irritants are detected, the clean air monitor function will indicate the level
of pollution. When pollution is severe, all four LEDs will glow.
No Pollution Detected Some Pollution Detected Severe Pollution Detected
How to Operate
Place at least one foot away from the nearest wall.
How to Start
Plug into a proper socket. Press the POWER ON/OFF button. The Power button and the UV / Negative
Ion Indicator will be lit. Press POWER ON/OFF again and the device will stop working.
Fan Modes
This device has five different fan modes to choose from. Please choose a proper level of circulation
according to your indoor air quality and room size. When you press FAN, the fan mode will change with
each press of the button. The LED will show which of the following modes is selected:
Automatic Operation
Keep pressing the FAN button until automatic operation is selected (the LED will show AUTO).
Under automatic operation, the device automatically switches to the proper fan speed (MED or LOW)
according to the level of odor, dust, or irritants in the air as detected by the sensor. As the air is purified,
the device will automatically switch back to LOW or QUIET modes.
Timer
Press AUTOTIMER button to set operation timing. Under the AUTOTIMER function, the operation timing
will be set according to the number of times you press the AUTOTIMER button. The LED will show which
of the following time periods is selected: