User Manual
© 2017 AMETEK Electronic Systems Protection / Technical Support: 1-800-645-9721 / surgex.com 10
c. Click Detect.
i.
The auto detect process will automatically detect the COM Port number
assigned to the Data Interface Cable
.
ii. If the auto detection process is successful, click Save. The software is
now properly configured and ready for use.
iii. If the auto detection process is not successful, verify that the Data
Interface Cable device drivers are properly installed, and that the physical
connections between the enVision and the PC have been made correctly.
d. The language may also be selected in this mode.
4. Software Modes
The Next Gen software is organized into several operational modes. The modes are
activated by clicking the corresponding button at the bottom of the software interface.
Note:
Some features are only available when used with an enVision PCS product.
Press the Help Button
(“?”) in the upper right for additional information on the features
available in the current mode. Hovering the mouse cursor over items will also display
additional information.
Scope Mode, Chart Mode, Historical Data Mode, and Settings Mode
include a Save function. Press the Save button to save data to a CSV file.
Time Stamped data may also be saved as a report in PDF format.
Chart Mode and Historical data may be analyzed by an automatic Expert
Analysis tool. Press the Expert button to perform an expert analysis of
recorded time-stamped event data or chart measurements and generate a
PDF report of potential conclusions and recommendations.
