7
vacuum from the electrical mains and check for improper use
conditions.
The Thermal Limiter will not intervene i
f
the appliance is correctly
used.
MAINTENANCE
WARNING
A yearly technical check on parts and filtering
system by an authorized service center is required.
Service indicator (1
2
)
The indicator turns on for scheduled service to keep the machine
in
working condition. When warning light is on contact an
authorized service center to check and service the appliance and
reset the warning light.
The prolonged use of the vacuum cleaner with the warning light
on can cause more maintenance operation.
Ordinary check operations
WARNING
For user servicing, the appliance must be dis-
mantled, cleaned and serviced, as far as it is reasonably practi-
cable, without causing risk to the maintenance staff and others.
Suitable precautions include, decontamination before disman-
tling, provision for local filtered exhaust ventilation where the ap-
pliance is dismantled (according to local regulations), cleaning of
the maintenance area and suitable personal protection.
- Check the vacuum hose conditions;
-
C
lean the liquid level sensor (
18
)
- Check the power cord, plug and outlet socket conditions:
to
replace, contact
contact an authorized service center
- Check the filter bag: do not exceed recommended weight and
capacity! In case of laceration or perforation of the bag check
the filter cartridge and eventually ask for replacement to an au-
thorized service center;
- Check filter cartridges condition (
17
). In case of lacerations or per-
forations contact an authorized service center for replacement.
WARNING
Do not use the appliance without the full filter
set fitted!
Bag replacement
WARNING
Do not spread dust during dust bag replacement!
- Wear an adequate dust mask
.
- Detach the vacuum head pulling out the side hooks (
8
) and
remove the vacuum head (1) (pic. 7-8).
Filter replacement
WARNING
Do not spread dust during filter replacement!
- Wear adequate filter mask;
- Detach the vacuum head pulling out the side hooks (
8
) (pic.7-8);
- Turn the vacuum head upside down (pic.12);
- Remove the filter frame (
15
) turning the hooks (
16
) (pic.1
2
);
- Remove the filter cartridges (pic.1
3
) and fit them into a sealed
disposal bag;
- Fit new filter (cod. 036.1108) cartridges in the filter frame (pic.1
4
)
and reassemble it on the vacuum head.
WARNING
Use genuine Surfprep spare parts only. Refer to
www.surfprepsanding.com
for parts code and authorized service
center
Storage
When not in use, keep the appliance in a dry and cool place
.
WARNING
Do not stor
e
out
doors
Surf
P
rep will not be held responsible for direct or indirect
damages resulting from non-compliance with the requirements
of this manual.
TOOL IDENTIFICATION PLATE
POSITION AND MEANING OF INFORMATION
1. Tool identification;
2. Serial number;
A. Class of protection;
B. Nominal working voltage Volts (V);
C. Working frequency Hertz (Hz);
D. Nominal working voltage Amps (A);
E. Vacuum Motor Watt (W);
F. Max power at socket Watt (W).
G. Total max power (W)
H. 3 Wire. It indicates the kind of supply connection
TROUBLESHOO
T
ING AND SOLUTION
S
Effects
Causes
Solutions
The motor will not start
No power
Make sure the unit is
plugged in
Power cord, switch or
motor defective
Contact an authorized
service center
The vacuum does not
start automatically
Electronic module
Contact an authorized
service center
Vacuum flow is
insufficient
Bag full
Check the filter bag
One of the hoses or
accessories is clogged
Check the flexible hose
and the accessories
Clogged filters
Check the filters
cartridges
Dust from the exhaust Filter cartridge torn
ripped
Contact an authorized
service center
Tools do not star t
3-way switch
malfunction
Contact an authorized
service center
Red indicator on
Ordinary maintenance
limit exceeded
Contact an authorized
service center
Yellow indicator on
Max. liquid level
exceeded
Empty the bin
Содержание POV-8
Страница 3: ...3 6 8 20 9 10 11 12 13 14 15 16 7 0 ...