SURF & TURF CANOPRO LITE SHELTER 10ft x 6.5ft, Инструкция по сборке

Страница: 8 / 21

You will notice a 45 degree cut in the
corners of the sidewalls velcro strip.
Align the top edge of the cut to the
inside of the leg and attach to the velcro,
allowing for the zipper to wrap around
the outside leg. Keep the wall velcro
straight and hook to the canopy velcro
very tightly all the way across.
Once complete, secure the velcro leg
straps as seen in image two.
Zip the next sidewall to the previous and
pull tight before pressing to velcro. Install
in a clockwise or counter clockwise
direction for all four.
Secure the velcro to the legs and insert
the elasticated hooks into the leg hole
as seen left to secure the bottom of the
sidewall.
After raising both sides, the frame should be pegged through the footplate holes on
soft ground, or weighted on hard standing ground, making sure all legs are straight,
and not sticking out.