SureShot ACFC-10 Скачать руководство пользователя страница 17

Страница: 17 / 24

ACFC-10 FlavorShot • SureShot Technical Assistance Center: 1-888-777-9990 or 902-865-9602

Product Dispense Block

1. Using a small brush dipped in warm, clean, soapy water, wash thoroughly to reach all

corners and crevices.

2. Wipe dispense block using a soft cloth dampened with warm, clean water.
3. Air

dry.

Inside Dispenser Drawer

1.  Unplug the dispenser.
2.  Open the dispenser drawer.
3.  Wipe dispenser interior using a soft cloth dampened slightly with warm, clean water.

Note: Do not get any moisture on the circuit boards behind each pump.

4. Dry

thoroughly.

5. Plug in the dispenser.

Pump Replacement

Should the need arise to replace a pump, contact the
SureShot Technical Assistance Center at 1-888-777-9990 or
902-865-9602 to obtain a new one.
Replacement is quick and easy and is completed without the
use of tools. Simply follow the steps below.

Pump Removal

1. Remove flavor cartridge from pump.

Cartridge may be removed completely from dispenser or
removed from pump only and placed on top of drawer until
new pump installation is complete.

2. Press and hold tab on bottom left of pump.
3. Lift pump up and toward you to remove from dispenser

drawer.

Pump Installation

1. Align screw heads on the back of the pump to the tops of

the key holes in the dispenser drawer.

2. Align tab on bottom of pump to slot in the floor of the

dispenser drawer.

3. Slide cartridge down until tab clicks into slot.

Tab on pump

Screw heads on

Key holes

back of pump

Содержание ACFC-10

























Результаты поиска

Содержание ACFC-10

Отзывы:

Похожие инструкции для ACFC-10

Бренды по названию

Популярные бренды

SureShot ACFC-10, Руководство по эксплуатации

Результаты поиска

Содержание ACFC-10

Отзывы:

Похожие инструкции для ACFC-10

Бренды по названию

Популярные бренды