20
RECOMMENDED CLEANING SCHEDULE:
Cleaning Procedure
Frequency
Exterior Daily
Product dispensing block and area
Daily
Catch Tray
Daily
Flavor tank, cap, and pump systems
Every 30 days
GENERAL MAINTENANCE
•
Do not block the vents at the rear of the dispenser. The vents
must
be free and open to ensure proper ventilation and to prevent over-
heating and damage to the system.
•
Maintain air space on all sides of the dispenser.
TUBE MAINTENANCE
Check the dispense tubes periodically to ensure they are not blocked, cut,
cracked or disfigured. Damaged tubes must be replaced.
To replace the tube:
1. remove the tube from the barbed fittings at both ends – at the pump
outlet and at the product dispensing block.
2. cut replacement tube to the length of the tube you are replacing.
Replacement tubes are available from SureShot Dispensing
Systems® Technical Assistance Center at 1-888-777-9990 or
1-902-865-9602.
3. attach new tube to the barbed fittings at each end – at the pump
outlet and at the product dispensing block.
