SureShade ATF Скачать руководство пользователя страница 2

Страница: 2 / 4

Page 2 of 4

Mark the position of the mounting plates on the hardtop Fig 3 & 3A.

Remove the crossbar, spacer and actuators from the mounting plate so you can drill and secure the mounting
clamp to the hardtop in the marked locations. Secure actuators to the mounting clamps and slide the roller
assembly onto actuators and secure in place (Fig 4).

Slide crossbars onto actuators and secure in place.

Fig 4

Slide roller

assembly onto
actuators

Fig 5

Fig 6

Secure aft crossbar
in place with screw.

Secure mid
crossbar in place
with screw.

Fig 3

Fig 3A

Mark the position of

the mounting plates

Содержание ATF

Страница 1: ...6 6 Set up the electrical system Fig 7 7 Preload the canvas Fig 8 Position both actuators on top of the hardtop resting on the bottom half of the mounting clamps Fig 1 Insert the outer crossbar and or clamp roller to the actuators and measure across to align the actuators to be parallel Fig 2 NOTE the actuators must be aligned parallel to ensure proper functioning of the shade system Fig 1 Fig 2 I...

Страница 2: ...e the mounting clamp to the hardtop in the marked locations Secure actuators to the mounting clamps and slide the roller assembly onto actuators and secure in place Fig 4 Slide crossbars onto actuators and secure in place Fig 4 Slide roller assembly onto actuators Fig 5 Fig 6 Secure aft crossbar in place with screw Secure mid crossbar in place with screw Fig 3 Fig 3A Mark the position of the mount...

Страница 3: ...second until the slower actuator catches up and then continues movement again 1 All control wires for the actuators to the controller and connection from the boat power are supplied with Deutsch connectors Once the control wiring for the actuators is properly fed through tubing and fiberglass connect one end of the control wire to the actuator and the other end to the electrical housing 2 Connect ...

Страница 4: ...oller in the direction of the arrows Preload the roller several revolutions by rotating the canvas and roller in the same direction that the canvas comes off the roller in the direction of the arrows and zipper to outer crossbar Do as many revolutions as necessary to make sure that the canvas is taut Fig 8 ...

Результаты поиска

Содержание ATF

Отзывы:

Похожие инструкции для ATF

Бренды по названию

Популярные бренды

SureShade ATF, Инструкции по установке

Результаты поиска

Содержание ATF

Отзывы:

Похожие инструкции для ATF

Бренды по названию

Популярные бренды