INSTALLATION
SureCall TriFlex-2Go-T Multi-Use Kit
Cellphone-Mate, Inc.
Page 10
All rights reserved.
If unable to provide more antenna separation and the Alert LEDs flash after the initial
activation period, lower the dial above the blinking LED by 5dBs (for example, from
50 to 40) and monitor the bars on your cell phone to see whether reception has
improved.
The booster case may become warm during operation. This is normal.
Press any key on your cell phone to refresh communication with the base.
WARNING:
The booster is rated for 5-15V input voltage. DO NOT use the booster
with higher voltage power supply. This can damage the booster and/or cause
personal injury.
Note:
You can purchase an optional AC power supply if you want to use the booster
as an indoor desktop system.
Step 5. Configure Gain Settings (Marine Installations Only)
When using the booster in marine installations, set the
PCS
,
Cellular
, and
LTE /
AWS
dials on the top of the booster (see page 5) according to the coverage area
and distance between the indoor and outdoor antennas.
