Shakespeare Stream Marine Wireless Booster Kit
Shakespeare Stream Marine Wireless Booster Kit
5
Installation
sTep 1. insTall The helm anTenna
Choose a location for the inside antenna where increased signal is needed. Identify a location that is
1. Within 2 inches of typical cell phone location
2. At least 8 inches (20cm) from any person
3. At least 4 inches (10cm) from metal
Consider using a dash mount phone holder like the ones shown below. Newer boats may come with similar
holders pre-fabricated into the dash.
Antenna mounted beside holder
Antenna mounted behind holder
With
in 1
& 2
inch
es
Within 1 & 2 inches
* Note: The FCC prohibits physical contact between the inside antenna and a cellular device in higher power units like the
Stream. Maintain a clear gap between the cellular device and inside antenna.
* Note: Do not mount the inside antenna on or near metal surface or objects. Do not choose a metallic phone holder as it
may affect the performance of the Stream.
before insTallaTion
Please read through instructions in their entirety before proceeding. A
“soft installation” is strongly recommended prior to securing any cable or
permanently fixing any parts, as adjustments may be needed.
Also, please note the following key factors to optimizing performance:
1. Antenna separation: Ensure a minimum of 3 feet in separation between
outside antennas and the helm antenna
2. Helm antenna placement: Location of the helm antenna should be
within 2 inches of your cellular device. Ideal mounting locations include
beneath a phone mount or just below your console panel where a
cellular device can be placed.
LTE-A
LTE-V
CELLULAR
PCS
AWS
POWER
M
in
im
um
3
ft
a
nt
en
na
s
ep
ar
at
io
n
