11
Option B: Outdoor Yagi Antenna
Before installing a Yagi directional antenna, note that the antenna should be mounted on a pole or
pipe (not provided), at the highest possible location above the roofline where the antenna can “see”
your cell tower.
The antenna is mounted horizontally and aimed in the direction of your nearest cell tower. The
location of your carrier’s closest cell tower may be identified using antennasearch.com.
Once you have identified your install location, ensure that the mounting area has at least a 3-ft
radius clear of obstructions and other radiating
elements
As shown, assemble the u-bolt, bracket, nuts
and washers onto a pole or pipe as shown in the
illustration. Keep the connections loose enough
to allow the antenna to rotate until the optimum
direction is found.
Once the outside antenna is secured to a pipe
or pole, Connect antenna to cable connector for
the outdoor cable provided with your kit and run
along route to planned location of your booster.
Planned
booster
location
Outdoor
Cable
Outdoor Yagi
Mounting
pole not
provided
Nut
Washer
U-bolt
Bracket
Drip Hole
Low-Loss
Outdoor
Cable
Ensure that the mounting area has at least a 3-ft radius clear of obstructions and other radiating elements and
orient the antenna with the drip hole at the bottom.
InstallatIon
» 1-855-846-2654 » https://www.signalbooster.com » [email protected]
