12
Step 3. Install Indoor Antenna(s)
I
ndoor antennas may be either omni-directional ceiling mount or directional panel antennas. One
indoor cable is provided per antenna. For kits with multiple antennas, a cable splitter and joining
cable is also supplied.
It is highly recommended that you complete test the placement of your system before a securing the
permanent installation for each part.
•
For indoor dome antennas, mount on a ceiling in a central location where signal is needed.
•
For indoor panel antennas, mount on a wall that faces in the direction signal is needed.
The antenna location should allow for sufficient separation between the outside antenna and inside
antenna. Vertical separation is preferred as it is more effective than horizontal separation.
The minimum separating distance recommended is 50
vertical feet; however, increased separation, may be needed,
especially where vertical separation cannot be achieved.
Range provided by an antenna is dependent on the following
factors:
1. Signal level received by the outdoor antenna
2.
Physical obstructions between the antenna and mobile
devices
3. Isolation / separation between the outdoor and indoor
antennas
Option A:
Omni Antenna
Option B:
Directional Antenna
Antenna aiming and Isolation
A significant factor in determining
booster coverage performance
Splitter (for multiple antenna kits)
InstallatIon
» 1-855-846-2654 » https://www.signalbooster.com » [email protected]
