9
Step 2. Install the Outdoor Antenna
After identifying the area of strongest signal, choose the surface where you will mount your outside
antenna.
The location should allow for sufficient separation between the outside antenna and inside antennas. The
minimum separating distance recommended for this booster is 50 Ft. Vertical separation is preferred as it
is more effective than horizontal separation. See “Antenna Separation” on page 7.
The location should allow for sufficient separation between the outside antenna and inside antenna.
Vertical separation is preferred as it is more effective than horizontal separation.
The minimum separating distance recommended is 50 feet; however, increased separation,
especially where vertical separation cannot be achieved.
IMPORTANT: Do not collocate antennas or operate the outdoor antenna with any other antenna or signal booster.
Option B:
Yagi Antenna
Option A:
Omni Antenna
Option A: Outdoor Omni Antenna
The omni antenna is omni-directional, which receives and sends signals in a 360º radius. The
provided hardware allow for either a surface mount or pole-mount.
For best performance, be sure to place the outdoor antenna at least 50 feet from the indoor
antennas. Place the antenna as high as possible. Make sure that the mounting area has at least a
36-inch radius clear of obstructions and other radiating elements. The antenna should be mounted in
an upright position. See illustration.
Ante
nna
Sepa
ration
Required distance between
indoor & outdoor antennas
Outdoor/ Indoor Antenna Separation
A minimum of 50 ft. of separation
between the outdoor antenna and
indoor antennas is recommended for
best performance.
Reducing antenna separation will
reduce the coverage provided by
the booster and generally, additional
separation will provide better
performance.
InstallatIon
» 1-855-846-2654 » https://www.signalbooster.com » [email protected]
