SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]
22
CHAPTER 6: HDTV and Wi-Fi Installation
6.1 - HDTV Installation
1. Connect inside coax cable to the HDTV1 access port on the booster.
2. Connect the other end of the cable to the antenna port on the back of the television.
3. Connect the outside coax cable to the HDTV OUTSIDE port on the booster.
4. Connect the other end of the outside coax cable to the outside HDTV antenna.
6.2. - Scanning Local Television Channels
On your TV’s remote control, press the Input or Source button, from there you’ll select “TV” or “Air”.
Consult your TV manual for detailed instructions.
After selecting “Antenna” or “Air”, press the menu button. Choose the antenna option followed by Auto
Program.
You may then need to select the Air button where you can start searching for local channels.
The TV will automatically search all available stations. Once the scan is complete, you can exit your TV
menu and begin watching free, high-definition television.
6.3 Wi-Fi Connection
Installation Instructions:
1. Plug the Ethernet cable from your modem/router into the WAN port on the booster.
2. Power on the booster. The WAN and WLAN lights on the Force7 status LEDs will light up.
3. On your computer, tablet or cell phone, search available wireless networks and choose 11n AP. A
security password isn’t needed.
4. Enjoy enhanced Wi-Fi throughout your workplace.
Note : To access advanced settings for the internal router, contact SureCall at: 888-365-6283 and
we will send you the complete user manual for the router.
Configuration and Testing
