SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]
12
Planning
3.6 - Booster Location
Select an indoor location for the booster that meets the following criteria:
• Wall or ceiling mounts are acceptable
• Near a properly grounded 110 VAC outlet
• Not in a tightly enclosed or overly hot space
• All power, dip switches and warning lights easily visible
• Least amount of cable to connect all antennas
3.7 - Accessories
The final step in the planning process is to make sure you have all of the necessary accessories to
complete the installation. You will need all of the items listed in Chapter 1 of this manual plus some or
all of the following:
•
Cable clips: Use these to secure the cables to interior and exterior walls/ceilings.
•
Appropriately rated sealant/caulking: Use this to waterproof the opening where the cable from the
exterior antenna enters the building, if needed.
• Hand and/or power tools: As needed to complete the installation.
•
Personal Protective Equipment (PPE): Use all PPE required by local codes and/or best practices
to help ensure personal safety during installation.
Note:
You may need to obtain a permit from your local building department to install the booster and
antennas. Check your local building and/or electrical codes.
3.8 - Need Help?
If you need help planning your installation, please contact a qualified installer, the reseller from whom
you purchased the booster, or SureCall.
CAUTION: YOU ARE RESPONSIBLE FOR ENSURING
THAT THE INSTALLATION MEETS ALL APPLICABLE
CODES.
